Z31/SENSORS/fprcs php: Difference between revisions
m XenonzcarImporter moved page Sites/Xenonzcar/z31/SENSORS/fprcs php to Z31/SENSORS/fprcs php without leaving a redirect: Flatten Sites/ namespace; provenance preserved via ImportedFrom banner |
Inline image refs: rewrite to local archive; clean empty image artifacts |
||
| Line 1: | Line 1: | ||
{{ImportedFrom|site=Xenonzcar|title=Z31 (PRESSURE REGULATOR) CONTROL SOLENOID VALVE|url= | {{ImportedFrom|site=Xenonzcar|title=Z31 (PRESSURE REGULATOR) CONTROL SOLENOID VALVE|url=https://dev.z31library.com/xenonzcar_archive/z31/SENSORS/fprcs.php.html|archive=https://dev.z31library.com/xenonzcar_archive/z31/SENSORS/fprcs.php.html|fetched=2026-05-15}} | ||
== Z31 (PRESSURE REGULATOR) CONTROL SOLENOID VALVE == | == Z31 (PRESSURE REGULATOR) CONTROL SOLENOID VALVE == | ||
Revision as of 18:01, 16 May 2026
Imported page. This page was converted from an archived copy of "Z31 (PRESSURE REGULATOR) CONTROL SOLENOID VALVE" (Xenonzcar, fetched 2026-05-15). The conversion was mechanical, so tables, links and formatting may contain conversion artefacts. Compare against the archived copy if something looks wrong. The content belongs to its original authors.
Z31 (PRESSURE REGULATOR) CONTROL SOLENOID VALVE
The solenoid valve actuates in response to the ON/OFF signal from the E.C.U. This controls when the Vacuum source is applied to the Fuel Pressure Regulator.
When it is off, a vacuum signal from the intake manifold is fed into the pressure regulator. As the control unit outputs an ON signal, the coil pulls the plunger downward, and cuts the vacuum signal.
This solinoid is used to increase fuel pressure during starting when the car is hot.
Common Problems
- Issues starting when the engine is warm