Z31/headlampdownmod php: Difference between revisions
Inline image refs: rewrite to local archive; clean empty image artifacts |
CleanupBot (talk | contribs) Residue cleanup: re-convert body verbatim from archived source; restores 1 dropped text blocks |
||
| Line 5: | Line 5: | ||
One of the coolest visual tricks you can do on the Z31 is keeping the headlights in the down position while your lights are turned on. This subtle modification not only gives the car a cleaner, sleeker front profile at night, but it also accentuates the wedge-shaped lines and classic '80s sports car look. With the headlamp doors closed and the driving lights on, the Z31 takes on a more modern and aggressive appearance that sets it apart from other cars on the road—especially when compared to the usual "pop-up" look. It's a simple change that makes your Z31 look sharper, more mysterious, and truly unique among classic Nissans. | One of the coolest visual tricks you can do on the Z31 is keeping the headlights in the down position while your lights are turned on. This subtle modification not only gives the car a cleaner, sleeker front profile at night, but it also accentuates the wedge-shaped lines and classic '80s sports car look. With the headlamp doors closed and the driving lights on, the Z31 takes on a more modern and aggressive appearance that sets it apart from other cars on the road—especially when compared to the usual "pop-up" look. It's a simple change that makes your Z31 look sharper, more mysterious, and truly unique among classic Nissans. | ||
[https://www.youtube.com/channel/UCKbLhXjn8XVfYVdTt1GWbIA MuhKayden] | Provided By [https://www.youtube.com/channel/UCKbLhXjn8XVfYVdTt1GWbIA MuhKayden] | ||
This video uses a relay mod as well (not documented here) but you can see the look of the mod. | This video uses a relay mod as well (not documented here) but you can see the look of the mod. | ||
==== Process ==== | ==== Process ==== | ||
# First, remove the lower driver side dash panel by taking out the 3 screws and disconnecting the vent selector vacuum line and kick panel lamp. | |||
# Now look to the right of the steering column and you should see a black connector that's about one inch with two wires.<br /> https://dev.z31library.com/xenonzcar_archive/z31/images/headlamp_down_mod/plug.jpg | |||
Now look to the right of the steering column and you should see a black connector that's about one inch with two wires. | # To enable this mod, just disconnect the connector. This will now keep the headlamp motors from moving the headlights with the low beams being turned on for the first time. | ||
# Test by turning on the lights. | |||
# Test to be sure the headlights still pop up by pushing the manual button and by turning on the high beams. | |||
For all models, the connector is in approximately the same location. Sometimes the connector is hidden by other wires as shown here: | For all models, the connector is in approximately the same location. Sometimes the connector is hidden by other wires as shown here: | ||
Revision as of 22:20, 20 October 2026
Imported page. This page was converted from an archived copy of "Z31 Headlamp Down Mod (Sleepy Eyes)" (Xenonzcar, fetched 2026-05-15). The conversion was mechanical, so tables, links and formatting may contain conversion artefacts. Compare against the archived copy if something looks wrong. The content belongs to its original authors.
Z31 Headlamp Down Mod (Sleepy Eyes)
One of the coolest visual tricks you can do on the Z31 is keeping the headlights in the down position while your lights are turned on. This subtle modification not only gives the car a cleaner, sleeker front profile at night, but it also accentuates the wedge-shaped lines and classic '80s sports car look. With the headlamp doors closed and the driving lights on, the Z31 takes on a more modern and aggressive appearance that sets it apart from other cars on the road—especially when compared to the usual "pop-up" look. It's a simple change that makes your Z31 look sharper, more mysterious, and truly unique among classic Nissans.
Provided By MuhKayden This video uses a relay mod as well (not documented here) but you can see the look of the mod.
Process
- First, remove the lower driver side dash panel by taking out the 3 screws and disconnecting the vent selector vacuum line and kick panel lamp.
- Now look to the right of the steering column and you should see a black connector that's about one inch with two wires.
- To enable this mod, just disconnect the connector. This will now keep the headlamp motors from moving the headlights with the low beams being turned on for the first time.
- Test by turning on the lights.
- Test to be sure the headlights still pop up by pushing the manual button and by turning on the high beams.
For all models, the connector is in approximately the same location. Sometimes the connector is hidden by other wires as shown here:
The headlights will remain up once the high beams are turned on or the switch is used to raise the headlamps with this version of the mod. The video above uses a relay mod that disables this fully and only allows the pod switch to move the headlamp motors.
Sources Used
- Images by: Louis Miller
- Video by: MuhKayden on YouTube