Z31/SENSORS/caswires/2: Difference between revisions
Inline image refs: rewrite to local archive; clean empty image artifacts |
CleanupBot (talk | contribs) Rewrite 2 dev.z31library.com link(s) to z31library.com |
||
| Line 1: | Line 1: | ||
{{ImportedFrom|site=Xenonzcar|title=Z31 Crank Angle Sensor Pin 2|url=https:// | {{ImportedFrom|site=Xenonzcar|title=Z31 Crank Angle Sensor Pin 2|url=https://z31library.com/xenonzcar_archive/z31/SENSORS/caswires/2.html|archive=https://z31library.com/xenonzcar_archive/z31/SENSORS/caswires/2.html|fetched=2026-05-15}} | ||
Pin 2 (G/B)Green with Black trace. This is one half of the sensor trigger. It connects to Pin 17 of the ECCS unit. | Pin 2 (G/B)Green with Black trace. This is one half of the sensor trigger. It connects to Pin 17 of the ECCS unit. | ||
Latest revision as of 22:53, 20 October 2026
Imported page. This page was converted from an archived copy of "Z31 Crank Angle Sensor Pin 2" (Xenonzcar, fetched 2026-05-15). The conversion was mechanical, so tables, links and formatting may contain conversion artefacts. Compare against the archived copy if something looks wrong. The content belongs to its original authors.
Pin 2 (G/B)Green with Black trace. This is one half of the sensor trigger. It connects to Pin 17 of the ECCS unit.
When Troubleshooting you should read Infinate resistance when Measuring pins 8 and 17 at the ECCS and will read 0 with Pins 2 and 3 at this plug connected by a jumper