Z31/wheelstudreplacement php: Difference between revisions
Reformat: split adjacent link runs into bulleted lists |
CleanupBot (talk | contribs) m Rewrite 14 dev.z31library.com link(s) to z31library.com |
||
| (2 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
{{ImportedFrom|site=Xenonzcar|title=Z31 Wheel Stud Replacement|url=https:// | {{ImportedFrom|site=Xenonzcar|title=Z31 Wheel Stud Replacement|url=https://z31library.com/xenonzcar_archive/z31/wheelstudreplacement.php.html|archive=https://z31library.com/xenonzcar_archive/z31/wheelstudreplacement.php.html|fetched=2026-05-15}} | ||
== Z31 Wheel Stud Replacement == | == Z31 Wheel Stud Replacement == | ||
https:// | https://z31library.com/xenonzcar_archive/z31/images/Wheelstudreplacement/step1.jpg | ||
So, you go to take off your wheel to rotate your tires or change your brakes. You start to loosen the lug nuts and you hear SNAP and the lugnut falls off. You look and the wheel stud just broke off. Here is how you fix this. | So, you go to take off your wheel to rotate your tires or change your brakes. You start to loosen the lug nuts and you hear SNAP and the lugnut falls off. You look and the wheel stud just broke off. Here is how you fix this. | ||
''WARNING | ''' | ||
*WARNING* - Do this modification at your own risk. We Are not responsable for any issues of your own doing. | |||
''' | |||
=== Items Needed === | === Items Needed === | ||
| Line 13: | Line 17: | ||
=== Parts & Tools Needed === | === Parts & Tools Needed === | ||
* Front Wheel Stud for 1984-1986 Non-turbo and turbo ([https://www.nissanpartsdeal.com/page_product/searchbyname?vin=&make=Nissan&model=300ZX&year=1988&submodel=&extra1=&extra2=&filter=()&keywords=40222-Z31001 Nissan part # 40222-Z31001]) | |||
Front Wheel Stud for 1984-1986 Non-turbo and turbo | * Front Wheel Stud for 1987-1989 Non-Turbo ([https://www.nissanpartsdeal.com/page_product/searchbyname?vin=&make=Nissan&model=300ZX&year=1988&submodel=&extra1=&extra2=&filter=()&keywords=43222-Z31001 Nissan part # 43222-Z31001]) | ||
( | * Front Wheel Stud for 1987-1989 Turbo ([https://www.nissanpartsdeal.com/page_product/searchbyname?vin=&make=Nissan&model=300ZX&year=1988&submodel=&extra1=&extra2=&filter=()&keywords=43222-Z31005 Nissan part # 43222-Z31005]) | ||
[https://www.nissanpartsdeal.com/page_product/searchbyname?vin=&make=Nissan&model=300ZX&year=1988&submodel=&extra1=&extra2=&filter=( Nissan part # 40222-Z31001] | * Rear Wheel Stud ([https://www.nissanpartsdeal.com/page_product/searchbyname?vin=&make=Nissan&model=300ZX&year=1988&submodel=&extra1=&extra2=&filter=()&keywords=43222-Z31006 Nissan part # 43222-Z31006]) | ||
Front Wheel Stud for 1987-1989 Non-Turbo | * Lug wrench | ||
( | |||
[https://www.nissanpartsdeal.com/page_product/searchbyname?vin=&make=Nissan&model=300ZX&year=1988&submodel=&extra1=&extra2=&filter=( Nissan part # 43222-Z31001] | |||
Front Wheel Stud for 1987-1989 Turbo | |||
( | |||
[https://www.nissanpartsdeal.com/page_product/searchbyname?vin=&make=Nissan&model=300ZX&year=1988&submodel=&extra1=&extra2=&filter=( Nissan part # 43222-Z31005] | |||
Rear Wheel Stud | |||
( | |||
[https://www.nissanpartsdeal.com/page_product/searchbyname?vin=&make=Nissan&model=300ZX&year=1988&submodel=&extra1=&extra2=&filter=( Nissan part # 43222-Z31006] | |||
* Jack | * Jack | ||
* Jackstands | * Jackstands | ||
* Ratchet set | * Ratchet set | ||
* A few washers | * A few washers | ||
* Open ended Lug nut ([https://www.nissanpartsdeal.com/page_product/searchbyname?vin=&make=Nissan&model=300ZX&year=1988&submodel=&extra1=&extra2=&filter=()&keywords=40224-Z31001 Nissan Part # 40224-Z31001]) | |||
Open ended Lug nut | * PB Blaster | ||
( | |||
[https://www.nissanpartsdeal.com/page_product/searchbyname?vin=&make=Nissan&model=300ZX&year=1988&submodel=&extra1=&extra2=&filter=( Nissan Part # 40224-Z31001] | |||
* Hammer | * Hammer | ||
* Punch | * Punch | ||
| Line 39: | Line 33: | ||
=== Rear Replacement === | === Rear Replacement === | ||
# Loosen the wheel lugs. Do not take them off yet. | |||
# Jack the car up at the correct jacking point and secure the car on jackstands. | |||
# Remove the lug nuts and take off the wheel.<br /> https://z31library.com/xenonzcar_archive/z31/images/Wheelstudreplacement/step2.png | |||
Remove the lug nuts and take off the wheel. | # Remove the 17mm bolts from the rear brake caliper and hang the caliper with a rope or wire, keeping the weight off the rubber brake line. | ||
# Pull off the rear brake rotor. If it is stuck, tap it loose with a rubber mallet.<br /> https://z31library.com/xenonzcar_archive/z31/images/Wheelstudreplacement/step3.png | |||
# Using a hammer and punch, knock the broken stud out of the stub axle from the front to rear.<br /> <br /> https://z31library.com/xenonzcar_archive/z31/images/Wheelstudreplacement/step4.png https://z31library.com/xenonzcar_archive/z31/images/Wheelstudreplacement/005.png https://z31library.com/xenonzcar_archive/z31/images/Wheelstudreplacement/007.png | |||
# Install the new stud from the rear of the stub axle. Use a nut to pull the stud into the stub axle to the correct location.<br /> <br /> https://z31library.com/xenonzcar_archive/z31/images/Wheelstudreplacement/010.png https://z31library.com/xenonzcar_archive/z31/images/Wheelstudreplacement/012.png | |||
Pull off the rear brake rotor. If it is stuck, tap it loose with a rubber mallet. | # Reinstall the wheel and lower the car. | ||
Using a hammer and punch, knock the broken stud out of the stub axle from the front to rear. | |||
Install the new stud from the rear of the stub axle. Use a nut to pull the stud into the stub axle to the correct location. | |||
=== Front Replacement === | === Front Replacement === | ||
| Line 60: | Line 46: | ||
The front studs are also fairly easy to replace. To replace them, follow the following steps. | The front studs are also fairly easy to replace. To replace them, follow the following steps. | ||
# Loosen the wheel lugs. Do not take them off yet. | |||
# Jack the car up at the correct jacking point and secure the car on jackstands. | |||
# Remove the lug nuts and take off the wheel. | |||
# Remove the 17mm bolts from the brake caliper and hang the caliper with a rope or wire, keeping the weight off the rubber brake line.<br /> https://z31library.com/xenonzcar_archive/z31/images/front%20strut/CaliperRemoval.jpg | |||
Remove the 17mm bolts from the brake caliper and hang the caliper with a rope or wire, keeping the weight off the rubber brake line. | # Remove the hub dust cap, cotter pin, and then remove the hub spindle nut.<br /> https://z31library.com/xenonzcar_archive/z31/images/front%20strut/hubexploded.png | ||
# Remove the hub assembly and take it to a workbench.<br /> https://z31library.com/xenonzcar_archive/z31/images/front%20strut/hubremoval.png | |||
# Using a hammer and punch, knock the broken stud out of the hub from the front to rear.<br /> https://z31library.com/xenonzcar_archive/z31/images/front%20strut/rotor2.png 1984-1986 style front hub shown | |||
Remove the hub dust cap, cotter pin, and then remove the hub spindle nut. | # Install the new stud from the rear of the hub. Use a nut to pull the stud into the hub to the correct location. | ||
# Check your bearings while you have the hub off and repack with grease if needed. | |||
# Reinstall the hub onto the spindle and torque the hub nut to 18 to 22 ft-lbs. | |||
Remove the hub assembly and take it to a workbench. | # Reinstall the wheel and lower the car. | ||
Using a hammer and punch, knock the broken stud out of the hub from the front to rear. | |||
1984-1986 style front hub shown | |||
=== Sources Used === | === Sources Used === | ||
[ | * [[Z31/z31fsm php|1984-1988 Nissan 300ZX Factory Service Manual]] | ||
* Write up by: Redare | * Write up by: Redare | ||
[[Category:Imported from Xenonzcar]] | [[Category:Imported from Xenonzcar]] | ||
Latest revision as of 22:55, 20 October 2026
Imported page. This page was converted from an archived copy of "Z31 Wheel Stud Replacement" (Xenonzcar, fetched 2026-05-15). The conversion was mechanical, so tables, links and formatting may contain conversion artefacts. Compare against the archived copy if something looks wrong. The content belongs to its original authors.
Z31 Wheel Stud Replacement[edit]
So, you go to take off your wheel to rotate your tires or change your brakes. You start to loosen the lug nuts and you hear SNAP and the lugnut falls off. You look and the wheel stud just broke off. Here is how you fix this.
- WARNING* - Do this modification at your own risk. We Are not responsable for any issues of your own doing.
Items Needed[edit]
Parts & Tools Needed[edit]
- Front Wheel Stud for 1984-1986 Non-turbo and turbo (Nissan part # 40222-Z31001)
- Front Wheel Stud for 1987-1989 Non-Turbo (Nissan part # 43222-Z31001)
- Front Wheel Stud for 1987-1989 Turbo (Nissan part # 43222-Z31005)
- Rear Wheel Stud (Nissan part # 43222-Z31006)
- Lug wrench
- Jack
- Jackstands
- Ratchet set
- A few washers
- Open ended Lug nut (Nissan Part # 40224-Z31001)
- PB Blaster
- Hammer
- Punch
Rear Replacement[edit]
- Loosen the wheel lugs. Do not take them off yet.
- Jack the car up at the correct jacking point and secure the car on jackstands.
- Remove the lug nuts and take off the wheel.
- Remove the 17mm bolts from the rear brake caliper and hang the caliper with a rope or wire, keeping the weight off the rubber brake line.
- Pull off the rear brake rotor. If it is stuck, tap it loose with a rubber mallet.
- Using a hammer and punch, knock the broken stud out of the stub axle from the front to rear.
- Install the new stud from the rear of the stub axle. Use a nut to pull the stud into the stub axle to the correct location.
- Reinstall the wheel and lower the car.
Front Replacement[edit]
The front studs are also fairly easy to replace. To replace them, follow the following steps.
- Loosen the wheel lugs. Do not take them off yet.
- Jack the car up at the correct jacking point and secure the car on jackstands.
- Remove the lug nuts and take off the wheel.
- Remove the 17mm bolts from the brake caliper and hang the caliper with a rope or wire, keeping the weight off the rubber brake line.
- Remove the hub dust cap, cotter pin, and then remove the hub spindle nut.
- Remove the hub assembly and take it to a workbench.
- Using a hammer and punch, knock the broken stud out of the hub from the front to rear.
1984-1986 style front hub shown - Install the new stud from the rear of the hub. Use a nut to pull the stud into the hub to the correct location.
- Check your bearings while you have the hub off and repack with grease if needed.
- Reinstall the hub onto the spindle and torque the hub nut to 18 to 22 ft-lbs.
- Reinstall the wheel and lower the car.
Sources Used[edit]
- 1984-1988 Nissan 300ZX Factory Service Manual
- Write up by: Redare