Z31/SENSORS/caswires/3: Difference between revisions
Inline image refs: rewrite to local archive; clean empty image artifacts |
CleanupBot (talk | contribs) Rewrite 2 dev.z31library.com link(s) to z31library.com |
||
| Line 1: | Line 1: | ||
{{ImportedFrom|site=Xenonzcar|title=Z31 Crank Angle Sensor Pin 3|url=https:// | {{ImportedFrom|site=Xenonzcar|title=Z31 Crank Angle Sensor Pin 3|url=https://z31library.com/xenonzcar_archive/z31/SENSORS/caswires/3.html|archive=https://z31library.com/xenonzcar_archive/z31/SENSORS/caswires/3.html|fetched=2026-05-15}} | ||
Pin 3 (G/Y)Green with Yellow trace. This is one half of the sensor trigger. It connects to Pin 8 of the ECCS unit. | Pin 3 (G/Y)Green with Yellow trace. This is one half of the sensor trigger. It connects to Pin 8 of the ECCS unit. | ||
Latest revision as of 22:53, 20 October 2026
Imported page. This page was converted from an archived copy of "Z31 Crank Angle Sensor Pin 3" (Xenonzcar, fetched 2026-05-15). The conversion was mechanical, so tables, links and formatting may contain conversion artefacts. Compare against the archived copy if something looks wrong. The content belongs to its original authors.
Pin 3 (G/Y)Green with Yellow trace. This is one half of the sensor trigger. It connects to Pin 8 of the ECCS unit.
When Troubleshooting you should read Infinate resistance when Measuring pins 8 and 17 at the ECCS and will read 0 with Pins 2 and 3 at this plug connected by a jumper