Z31/RebuildingLifters php - Revision history

CleanupBot: Rewrite 10 dev.z31library.com link(s) to z31library.com

2026-10-20T22:53:05Z

Rewrite 10 dev.z31library.com link(s) to z31library.com

CleanupBot: Residue cleanup: re-convert body verbatim from archived source; restores 1 dropped text blocks

2026-10-20T22:19:37Z

Residue cleanup: re-convert body verbatim from archived source; restores 1 dropped text blocks

← Older revision		Revision as of 22:19, 20 October 2026
Line 3:		Line 3:
	== Z31 Rebuilding Hydraulic Lifters ==		== Z31 Rebuilding Hydraulic Lifters ==

	=== Why Do Z31 Lifters Tap? ===		=== Why Do Z31 Lifters Tap? ===

	If you're reading this page, undoubtedly your lifters are tapping away at startup. Inside the hydraulic lifter used on the 300ZX, there is a small check valve—comprised of a ball bearing and a spring—which keeps oil in the lifter. As miles accrue on the engine, a buildup of sludge within the lifter can prevent this check valve from working, sticking it open.		If you're reading this page, undoubtedly your lifters are tapping away at startup. Inside the hydraulic lifter used on the 300ZX, there is a small check valve—comprised of a ball bearing and a spring—which keeps oil in the lifter. As miles accrue on the engine, a buildup of sludge within the lifter can prevent this check valve from working, sticking it open.
Line 15:		Line 15:
	You usually don’t need to buy new lifters! Typically, they can be disassembled, cleaned, and filled with new oil, making them good as new. Many Z31 owners have successfully rebuilt sets—six lifters can be done in about an hour with basic tools.		You usually don’t need to buy new lifters! Typically, they can be disassembled, cleaned, and filled with new oil, making them good as new. Many Z31 owners have successfully rebuilt sets—six lifters can be done in about an hour with basic tools.

	'''Tip:'''Always use clean oil and work in a clean area to prevent debris from getting inside the rebuilt lifters.		'''Tip:''' Always use clean oil and work in a clean area to prevent debris from getting inside the rebuilt lifters.

	''WARNING'' - Do this modification at your own risk. We Are not responsable for any issues of your own doing.		'''

			WARNING - Do this modification at your own risk. We Are not responsable for any issues of your own doing.

			'''

	=== Tools & Supplies Needed for Lifter Rebuild ===		=== Tools & Supplies Needed for Lifter Rebuild ===
Line 31:		Line 35:
	=== Procedure ===		=== Procedure ===

	* Remove the lifters from the engine. This is the trickiest part but not difficult.		# Remove the lifters from the engine. This is the trickiest part but not difficult.
	-		# Place the lifter on a clean surface (computer paper works well). Use a large c-clamp to compress the piston into the lifter body. Insert a 2-mm Allen wrench into the hole in the lifter; if the hole doesn't line up, loosen the clamp slightly and rotate the lifter body until it does, then insert the Allen wrench.<br /> https://dev.z31library.com/xenonzcar_archive/z31/images/Raredare1/Lifterrebuild/lifterrebuild1.jpg
	Place the lifter on a clean surface (computer paper works well). Use a large c-clamp to compress the piston into the lifter body. Insert a 2-mm Allen wrench into the hole in the lifter; if the hole doesn't line up, loosen the clamp slightly and rotate the lifter body until it does, then insert the Allen wrench.		# With the Allen wrench in place, release the c-clamp and remove the lifter. Using a dental pick or toothpick, carefully pry out the c-clip from the top of the lifter. Be careful, it can spring out.<br /> https://dev.z31library.com/xenonzcar_archive/z31/images/Raredare1/Lifterrebuild/lifterrebuild2.jpg
			# Disassemble the lifter: The crown should pull right out. The check valve assembly is a bit more stubborn. Insert a toothpick into the center and push the ball bearing down, then lever it out and remove the spring. You should have parts as shown:<br /> https://dev.z31library.com/xenonzcar_archive/z31/images/Raredare1/Lifterrebuild/lifterrebuild3.jpg
			# Clean all components thoroughly. Soak in Castrol’s Super Degreaser for ~30 min (or use lacquer thinner). The lifter should be grey when clean.
			# Test the check valve: Hold upright and pour lacquer thinner in. If it leaks, the valve is still dirty or bad. Clean more or replace if needed.
			# Once verified clean and functional, begin reassembly.
			# Fill the lifter body halfway with 30W engine oil (or synthetic 50W for high-temp use).<br /> https://dev.z31library.com/xenonzcar_archive/z31/images/Raredare1/Lifterrebuild/lifterrebuild5.jpg
			# Install the spring, then the check valve assembly. Use a toothpick to depress the ball bearing and push the valve fully in. Do this slowly to avoid squirting oil.<br /> https://dev.z31library.com/xenonzcar_archive/z31/images/Raredare1/Lifterrebuild/lifterrebuild6.jpg
			# Install the crown and coat the top lightly with oil.<br /> https://dev.z31library.com/xenonzcar_archive/z31/images/Raredare1/Lifterrebuild/lifterrebuild7.jpg
			# Use the c-clamp again to compress the lifter, insert the Allen wrench, then remove the clamp.<br /> https://dev.z31library.com/xenonzcar_archive/z31/images/Raredare1/Lifterrebuild/lifterrebuild8.jpg
			# Reinstall the c-clip. Lay one side in the groove and use a knife or small screwdriver to snap the other side in.<br /> https://dev.z31library.com/xenonzcar_archive/z31/images/Raredare1/Lifterrebuild/lifterrebuild9.jpg

	-		====
	~~With the Allen wrench in place, release the c-clamp and remove the lifter. Using a dental pick or toothpick, carefully pry out the c-clip from the top of the lifter. Be careful, it can spring out.~~

	-		That's it; you're done! Finish all other lifters in the vehicle and reassemble the engine. When you start the car, hold the idle at 1500 rpm for about 5 minutes to bleed the lifters.
	~~Disassemble~~ the ~~lifter: The crown should pull right out~~. ~~The check valve assembly is a bit more stubborn. Insert a toothpick into~~ the ~~center and push~~ the ~~ball bearing down, then lever it out and remove~~ the ~~spring~~. ~~You should have parts as shown:~~

	* Clean all components thoroughly. Soak in Castrol’s Super Degreaser for ~30 min (or use lacquer thinner). The lifter should be grey when clean.		Note: Some initial tapping after cleaning may occur, but the noise should not return at subsequent startups.
	* Test the check valve: ~~Hold upright and pour lacquer thinner in. If it leaks~~, the ~~valve is still dirty or bad. Clean more or replace if needed.~~
	* Once verified clean and functional, begin reassembly.
	-
	~~Fill the lifter body halfway with 30W engine oil (or synthetic 50W for high-temp use).~~

	-
	~~Install the spring, then the check valve assembly. Use a toothpick to depress the ball bearing and push the valve fully in. Do this slowly to avoid squirting oil.~~

	-
	~~Install the crown and coat the top lightly with oil.~~

	-
	~~Use the c-clamp again to compress the lifter, insert the Allen wrench, then remove the clamp.~~

	-
	~~Reinstall the c-clip. Lay one side in the groove and use a knife or small screwdriver to snap the other side in.~~

	~~That's it; you're done! Finish all other lifters in the vehicle and reassemble the engine. When you start the car, hold the idle~~ at ~~1500 rpm for about 5 minutes to bleed the lifters~~.

	=== Sources Used ===		=== Sources Used ===

	[[Z31/z31fsm php\|1984-1988 Nissan 300ZX Factory Service Manual]]		* [[Z31/z31fsm php\|1984-1988 Nissan 300ZX Factory Service Manual]]
	* Writen by: Redare		* Writen by: Redare

	[[Category:Imported from Xenonzcar]]		[[Category:Imported from Xenonzcar]]

XenonzcarImporter: Rewrite 1 archive URL(s) to internal wikilinks

2026-05-17T01:59:27Z

Rewrite 1 archive URL(s) to internal wikilinks

← Older revision		Revision as of 01:59, 17 May 2026
Line 63:		Line 63:
	=== Sources Used ===		=== Sources Used ===

	[~~https://dev.z31library.com/xenonzcar_archive/z31~~/z31fsm.php 1984-1988 Nissan 300ZX Factory Service Manual]		[[Z31/z31fsm php\|1984-1988 Nissan 300ZX Factory Service Manual]]
	* Writen by: Redare		* Writen by: Redare

	[[Category:Imported from Xenonzcar]]		[[Category:Imported from Xenonzcar]]

XenonzcarImporter: Reformat: split adjacent link runs into bulleted lists

2026-05-16T21:29:48Z

Reformat: split adjacent link runs into bulleted lists

← Older revision		Revision as of 21:29, 16 May 2026
Line 63:		Line 63:
	=== Sources Used ===		=== Sources Used ===

	[https://dev.z31library.com/xenonzcar_archive/z31/z31fsm.php 1984-1988 Nissan 300ZX Factory Service Manual]- Writen by: Redare		[https://dev.z31library.com/xenonzcar_archive/z31/z31fsm.php 1984-1988 Nissan 300ZX Factory Service Manual]
			* Writen by: Redare

	[[Category:Imported from Xenonzcar]]		[[Category:Imported from Xenonzcar]]

XenonzcarImporter: Inline image refs: rewrite to local archive; clean empty image artifacts

2026-05-16T18:01:27Z

Inline image refs: rewrite to local archive; clean empty image artifacts

← Older revision		Revision as of 18:01, 16 May 2026
Line 1:		Line 1:
	{{ImportedFrom\|site=Xenonzcar\|title=Z31 Rebuilding Hydraulic Lifters\|url=~~http~~://~~www~~.~~xenonzcar~~.com/z31/RebuildingLifters.php.html\|archive=https://dev.z31library.com/xenonzcar_archive/z31/RebuildingLifters.php.html\|fetched=2026-05-15}}		{{ImportedFrom\|site=Xenonzcar\|title=Z31 Rebuilding Hydraulic Lifters\|url=https://dev.z31library.com/xenonzcar_archive/z31/RebuildingLifters.php.html\|archive=https://dev.z31library.com/xenonzcar_archive/z31/RebuildingLifters.php.html\|fetched=2026-05-15}}

	== Z31 Rebuilding Hydraulic Lifters ==		== Z31 Rebuilding Hydraulic Lifters ==
Line 63:		Line 63:
	=== Sources Used ===		=== Sources Used ===

	[~~http~~://~~www~~.~~xenonzcar~~.com/z31/z31fsm.php 1984-1988 Nissan 300ZX Factory Service Manual]- Writen by: Redare		[https://dev.z31library.com/xenonzcar_archive/z31/z31fsm.php 1984-1988 Nissan 300ZX Factory Service Manual]- Writen by: Redare

	[[Category:Imported from Xenonzcar]]		[[Category:Imported from Xenonzcar]]

XenonzcarImporter: XenonzcarImporter moved page Sites/Xenonzcar/z31/RebuildingLifters php to Z31/RebuildingLifters php without leaving a redirect: Flatten Sites/ namespace; provenance preserved via ImportedFrom banner

2026-05-16T06:38:39Z

XenonzcarImporter moved page Sites/Xenonzcar/z31/RebuildingLifters php to Z31/RebuildingLifters php without leaving a redirect: Flatten Sites/ namespace; provenance preserved via ImportedFrom banner

← Older revision	Revision as of 06:38, 16 May 2026
(No difference)

XenonzcarImporter: Site import

2026-05-16T06:27:08Z

Site import

New page

{{ImportedFrom|site=Xenonzcar|title=Z31 Rebuilding Hydraulic Lifters|url=http://www.xenonzcar.com/z31/RebuildingLifters.php.html|archive=https://dev.z31library.com/xenonzcar_archive/z31/RebuildingLifters.php.html|fetched=2026-05-15}}

== Z31 Rebuilding Hydraulic Lifters ==

=== Why Do Z31 Lifters Tap? ===

If you're reading this page, undoubtedly your lifters are tapping away at startup. Inside the hydraulic lifter used on the 300ZX, there is a small check valve—comprised of a ball bearing and a spring—which keeps oil in the lifter. As miles accrue on the engine, a buildup of sludge within the lifter can prevent this check valve from working, sticking it open.

* When open, the oil within the lifter drains out.
* This prevents hydraulic pressure from building up.
* Result: The lifter “knocks” or taps, especially at startup.

The Good News:

You usually don’t need to buy new lifters! Typically, they can be disassembled, cleaned, and filled with new oil, making them good as new. Many Z31 owners have successfully rebuilt sets—six lifters can be done in about an hour with basic tools.

'''Tip:'''Always use clean oil and work in a clean area to prevent debris from getting inside the rebuilt lifters.

''WARNING'' - Do this modification at your own risk. We Are not responsable for any issues of your own doing.

=== Tools & Supplies Needed for Lifter Rebuild ===

* 3" or similar sized C-clamp: For compressing the lifter spring during disassembly/reassembly.
* 2 mm Allen wrench (or similar steel wire): A paperclip or small steel rod will work for releasing the check valve.
* Toothpicks or dental pick: For careful removal of internal components and debris.
* Heavy-duty straight 30W engine oil: Synthetic 50W can be used for extra protection (your preference).
* Paper towels: For cleanup and handling oil/parts.
* Good engine degreaser: Castrol Super Degreaser (purple) recommended for removing sludge.
* Lacquer thinner: For a final rinse and to ensure all oil and degreaser residue is removed.

=== Procedure ===

* Remove the lifters from the engine. This is the trickiest part but not difficult.
-
Place the lifter on a clean surface (computer paper works well). Use a large c-clamp to compress the piston into the lifter body. Insert a 2-mm Allen wrench into the hole in the lifter; if the hole doesn't line up, loosen the clamp slightly and rotate the lifter body until it does, then insert the Allen wrench.

-
With the Allen wrench in place, release the c-clamp and remove the lifter. Using a dental pick or toothpick, carefully pry out the c-clip from the top of the lifter. Be careful, it can spring out.

-
Disassemble the lifter: The crown should pull right out. The check valve assembly is a bit more stubborn. Insert a toothpick into the center and push the ball bearing down, then lever it out and remove the spring. You should have parts as shown:

* Clean all components thoroughly. Soak in Castrol’s Super Degreaser for ~30 min (or use lacquer thinner). The lifter should be grey when clean.
* Test the check valve: Hold upright and pour lacquer thinner in. If it leaks, the valve is still dirty or bad. Clean more or replace if needed.
* Once verified clean and functional, begin reassembly.
-
Fill the lifter body halfway with 30W engine oil (or synthetic 50W for high-temp use).

-
Install the spring, then the check valve assembly. Use a toothpick to depress the ball bearing and push the valve fully in. Do this slowly to avoid squirting oil.

-
Install the crown and coat the top lightly with oil.

-
Use the c-clamp again to compress the lifter, insert the Allen wrench, then remove the clamp.

-
Reinstall the c-clip. Lay one side in the groove and use a knife or small screwdriver to snap the other side in.

That's it; you're done! Finish all other lifters in the vehicle and reassemble the engine. When you start the car, hold the idle at 1500 rpm for about 5 minutes to bleed the lifters.

=== Sources Used ===

[http://www.xenonzcar.com/z31/z31fsm.php 1984-1988 Nissan 300ZX Factory Service Manual]- Writen by: Redare

[[Category:Imported from Xenonzcar]]

← Older revision		Revision as of 22:53, 20 October 2026
Line 1:		Line 1:
	{{ImportedFrom\|site=Xenonzcar\|title=Z31 Rebuilding Hydraulic Lifters\|url=https://~~dev.~~z31library.com/xenonzcar_archive/z31/RebuildingLifters.php.html\|archive=https://~~dev.~~z31library.com/xenonzcar_archive/z31/RebuildingLifters.php.html\|fetched=2026-05-15}}		{{ImportedFrom\|site=Xenonzcar\|title=Z31 Rebuilding Hydraulic Lifters\|url=https://z31library.com/xenonzcar_archive/z31/RebuildingLifters.php.html\|archive=https://z31library.com/xenonzcar_archive/z31/RebuildingLifters.php.html\|fetched=2026-05-15}}

	== Z31 Rebuilding Hydraulic Lifters ==		== Z31 Rebuilding Hydraulic Lifters ==
Line 36:		Line 36:

	# Remove the lifters from the engine. This is the trickiest part but not difficult.		# Remove the lifters from the engine. This is the trickiest part but not difficult.
	# Place the lifter on a clean surface (computer paper works well). Use a large c-clamp to compress the piston into the lifter body. Insert a 2-mm Allen wrench into the hole in the lifter; if the hole doesn't line up, loosen the clamp slightly and rotate the lifter body until it does, then insert the Allen wrench.<br /> https://~~dev.~~z31library.com/xenonzcar_archive/z31/images/Raredare1/Lifterrebuild/lifterrebuild1.jpg		# Place the lifter on a clean surface (computer paper works well). Use a large c-clamp to compress the piston into the lifter body. Insert a 2-mm Allen wrench into the hole in the lifter; if the hole doesn't line up, loosen the clamp slightly and rotate the lifter body until it does, then insert the Allen wrench.<br /> https://z31library.com/xenonzcar_archive/z31/images/Raredare1/Lifterrebuild/lifterrebuild1.jpg
	# With the Allen wrench in place, release the c-clamp and remove the lifter. Using a dental pick or toothpick, carefully pry out the c-clip from the top of the lifter. Be careful, it can spring out.<br /> https://~~dev.~~z31library.com/xenonzcar_archive/z31/images/Raredare1/Lifterrebuild/lifterrebuild2.jpg		# With the Allen wrench in place, release the c-clamp and remove the lifter. Using a dental pick or toothpick, carefully pry out the c-clip from the top of the lifter. Be careful, it can spring out.<br /> https://z31library.com/xenonzcar_archive/z31/images/Raredare1/Lifterrebuild/lifterrebuild2.jpg
	# Disassemble the lifter: The crown should pull right out. The check valve assembly is a bit more stubborn. Insert a toothpick into the center and push the ball bearing down, then lever it out and remove the spring. You should have parts as shown:<br /> https://~~dev.~~z31library.com/xenonzcar_archive/z31/images/Raredare1/Lifterrebuild/lifterrebuild3.jpg		# Disassemble the lifter: The crown should pull right out. The check valve assembly is a bit more stubborn. Insert a toothpick into the center and push the ball bearing down, then lever it out and remove the spring. You should have parts as shown:<br /> https://z31library.com/xenonzcar_archive/z31/images/Raredare1/Lifterrebuild/lifterrebuild3.jpg
	# Clean all components thoroughly. Soak in Castrol’s Super Degreaser for ~30 min (or use lacquer thinner). The lifter should be grey when clean.		# Clean all components thoroughly. Soak in Castrol’s Super Degreaser for ~30 min (or use lacquer thinner). The lifter should be grey when clean.
	# Test the check valve: Hold upright and pour lacquer thinner in. If it leaks, the valve is still dirty or bad. Clean more or replace if needed.		# Test the check valve: Hold upright and pour lacquer thinner in. If it leaks, the valve is still dirty or bad. Clean more or replace if needed.
	# Once verified clean and functional, begin reassembly.		# Once verified clean and functional, begin reassembly.
	# Fill the lifter body halfway with 30W engine oil (or synthetic 50W for high-temp use).<br /> https://~~dev.~~z31library.com/xenonzcar_archive/z31/images/Raredare1/Lifterrebuild/lifterrebuild5.jpg		# Fill the lifter body halfway with 30W engine oil (or synthetic 50W for high-temp use).<br /> https://z31library.com/xenonzcar_archive/z31/images/Raredare1/Lifterrebuild/lifterrebuild5.jpg
	# Install the spring, then the check valve assembly. Use a toothpick to depress the ball bearing and push the valve fully in. Do this slowly to avoid squirting oil.<br /> https://~~dev.~~z31library.com/xenonzcar_archive/z31/images/Raredare1/Lifterrebuild/lifterrebuild6.jpg		# Install the spring, then the check valve assembly. Use a toothpick to depress the ball bearing and push the valve fully in. Do this slowly to avoid squirting oil.<br /> https://z31library.com/xenonzcar_archive/z31/images/Raredare1/Lifterrebuild/lifterrebuild6.jpg
	# Install the crown and coat the top lightly with oil.<br /> https://~~dev.~~z31library.com/xenonzcar_archive/z31/images/Raredare1/Lifterrebuild/lifterrebuild7.jpg		# Install the crown and coat the top lightly with oil.<br /> https://z31library.com/xenonzcar_archive/z31/images/Raredare1/Lifterrebuild/lifterrebuild7.jpg
	# Use the c-clamp again to compress the lifter, insert the Allen wrench, then remove the clamp.<br /> https://~~dev.~~z31library.com/xenonzcar_archive/z31/images/Raredare1/Lifterrebuild/lifterrebuild8.jpg		# Use the c-clamp again to compress the lifter, insert the Allen wrench, then remove the clamp.<br /> https://z31library.com/xenonzcar_archive/z31/images/Raredare1/Lifterrebuild/lifterrebuild8.jpg
	# Reinstall the c-clip. Lay one side in the groove and use a knife or small screwdriver to snap the other side in.<br /> https://~~dev.~~z31library.com/xenonzcar_archive/z31/images/Raredare1/Lifterrebuild/lifterrebuild9.jpg		# Reinstall the c-clip. Lay one side in the groove and use a knife or small screwdriver to snap the other side in.<br /> https://z31library.com/xenonzcar_archive/z31/images/Raredare1/Lifterrebuild/lifterrebuild9.jpg

	====		====